EMT Practice Test

1. Question Content...


Question List

Question1: A business is using the local cable company to provide Internet access. Which of the following types of cabling will the cable company MOST likely use from the demarcation point back to the central office?

Question2: A technician wants to install a WAP in the center of a room that provides service in a radius surrounding a radio. Which of the following antenna types should the AP utilize?

Question3: A company is being acquired by a large corporation. As part of the acquisition process, the company's address should now redirect clients to the corporate organization page. Which of the following DNS records needs to be created?

Question4: An organization with one core and five distribution switches is transitioning from a star to a full-mesh topology Which of the following is the number of additional network connections needed?

Question5: Which of the following protocol types describes secure communication on port 443?

Question6: A network administrator is talking to different vendors about acquiring technology to support a new project for a large company. Which of the following documents will MOST likely need to be signed before information about the project is shared?

Question7: A network technician was troubleshooting an issue for a user who was being directed to cloned websites that were stealing credentials. The URLs were correct for the websites but an incorrect IP address was revealed when the technician used ping on the user's PC After checking the is setting, the technician found the DNS server address was incorrect Which of the following describes the issue?

Question8: Which of the following is the physical security mechanism that would MOST likely be used to enter a secure site?

Question9: Which of the following VPN configurations should be used to separate Internet and corporate traffic?

Question10: A technician is deploying a low-density wireless network and is contending with multiple types of building materials. Which of the following wireless frequencies would allow for the LEAST signal attenuation?

Question11: A network technician is reviewing an upcoming project's requirements to implement laaS. Which of the following should the technician consider?

Question12: Which of the following topologies requites the MOST connections when designing a network?

Question13: A technician is assisting a user who cannot connect to a network resource. The technician first checks for a link light. According to troubleshooting methodology, this is an example of:

Question14: Given the following information:

Which of the following command-line tools would generate this output?

Question15: Which of the following systems would MOST likely be found in a screened subnet?

Question16: An ARP request is broadcasted and sends the following request.
''Who is 192.168.1.200? Tell 192.168.1.55''
At which of the following layers of the OSI model does this request operate?

Question17: Which of the following is used to provide networking capability for VMs at Layer 2 of the OSI model?

Question18: A network technician reviews an entry on the syslog server and discovers the following message from a switch:
SPANNING-TREE Port 1/1 BLOCKED
Which of the following describes the issue?

Question19: Which of the following security devices would be BEST to use to provide mechanical access control to the MDF/IDF?

Question20: A network administrator needs to query the NSs for a remote application. Which of the following commands would BEST help the administrator accomplish this task?

Question21: Which of the following ports is commonly used by VoIP phones?

Question22: A store owner would like to have secure wireless access available for both business equipment and patron use. Which of the following features should be configured to allow different wireless access through the same equipment?

Question23: A network engineer is designing a new secure wireless network. The engineer has been given the following requirements:
1 Must not use plaintext passwords
2 Must be certificate based
3. Must be vendor neutral
Which of the following methods should the engineer select?

Question24: Which of the following BEST describes hosting several businesses on the same physical infrastructure?

Question25: A network administrator is troubleshooting the communication between two Layer 2 switches that are reporting a very high runt count. After trying multiple ports on both switches, the issue persists. Which of the following should the network administrator perform to resolve the issue?

Question26: An IT officer is installing a new WAP. Which of the following must the officer change to conned users securely to the WAP?

Question27: A network administrator is implementing OSPF on all of a company's network devices. Which of the following will MOST likely replace all the company's hubs?

Question28: Which of the following BEST describes a North-South traffic flow?

Question29: Which of the following protocols will a security appliance that is correlating network events from multiple devices MOST likely rely on to receive event messages?

Question30: A local firm has hired a consulting company to clean up its IT infrastructure. The consulting company notices remote printing is accomplished by port forwarding via publicly accessible IPs through the firm's firewall Which of the following would be the MOST appropriate way to enable secure remote printing?

Question31: A network technician is configuring a new firewall for a company with the necessary access requirements to be allowed through the firewall. Which of the following would normally be applied as the LAST rule in the firewall?

Question32: A network technician is investigating an IP phone that does not register in the VoIP system Although it received an IP address, it did not receive the necessary DHCP options The information that is needed for the registration is distributes by the OHCP scope All other IP phones are working properly. Which of the following does the technician need to verify?

Question33: A workstation is configured with the following network details:

Software on the workstation needs to send a query to the local subnet broadcast address. To which of the following addresses should the software be configured to send the query?

Question34: Wireless users are reporting intermittent internet connectivity. Connectivity is restored when the users disconnect and reconnect, utilizing the web authentication process each time. The network administrator can see the devices connected to the APs at all times. Which of the following steps will MOST likely determine the cause of the issue?

Question35: Which of the following provides redundancy on a file server to ensure the server is still connected to a LAN even in the event of a port failure on a switch?

Question36: A customer wants to segregate the traffic between guests on a hypervisor. Which of the following does a technician need to configure to meet the requirement?

Question37: A technician is searching for a device that is connected to the network and has the device's physical network address. Which of the following should the technician review on the switch to locate the device's network port?

Question38: A technician receives feedback that some users are experiencing high amounts of jitter while using the wireless network. While troubleshooting the network, the technician uses the ping command with the IP address of the default gateway and verifies large variations in latency. The technician thinks the issue may be interference from other networks and non-802.11 devices. Which of the following tools should the technician use to troubleshoot the issue?

Question39: Access to a datacenter should be individually recorded by a card reader even when multiple employees enter the facility at the same time. Which of the following allows the enforcement of this policy?

Question40: A technician is connecting multiple switches to create a large network for a new office. The switches are unmanaged Layer 2 switches with multiple connections between each pair. The network is experiencing an extreme amount of latency. Which of the following is MOST likely occurring?

Question41: A network requirement calls for segmenting departments into different networks. The campus network is set up with users of each department in multiple buildings. Which of the following should be configured to keep the design simple and efficient?

Question42: During the security audit of a financial firm the Chief Executive Officer (CEO) questions why there are three employees who perform very distinct functions on the server. There is an administrator for creating users another for assigning the users lo groups and a third who is the only administrator to perform file rights assignment Which of the following mitigation techniques is being applied'

Question43: An engineer is configuring redundant network links between switches. Which of the following should the engineer enable to prevent network stability issues?

Question44: A network administrator is reviewing interface errors on a switch. Which of the following indicates that a switchport is receiving packets in excess of the configured MTU?

Question45: Which of the following technologies allows traffic to be sent through two different ISPs to increase performance?

Question46: A Chief Information Officer (CIO) wants to improve the availability of a company's SQL database Which of the following technologies should be utilized to achieve maximum availability?

Question47: A technician is installing a cable modem in a SOHO. Which of the following cable types will the technician MOST likely use to connect a modem to the ISP?

Question48: Which of the following types of devices can provide content filtering and threat protection, and manage multiple IPSec site-to-site connections?

Question49: At which of the following OSI model layers would a technician find an IP header?

Question50: A technician is installing multiple UPS units in a major retail store. The technician is required to keep track of all changes to new and old equipment. Which of the following will allow the technician to record these changes?

Question51: A company requires a disaster recovery site to have equipment ready to go in the event of a disaster at its main datacenter. The company does not have the budget to mirror all the live data to the disaster recovery site. Which of the following concepts should the company select?

Question52: Which of the following is used to prioritize Internet usage per application and per user on the network?

Question53: A systems administrator needs to improve WiFi performance in a densely populated office tower and use the latest standard. There is a mix of devices that use 2.4 GHz and 5 GHz. Which of the following should the systems administrator select to meet this requirement?

Question54: A technician is writing documentation regarding a company's server farm. The technician needs to confirm the server name for all Linux servers. Which of the following commands should the technician run?

Question55: Which of the following uses the destination IP address to forward packets?

Question56: A company with multiple routers would like to implement an HA network gateway with the least amount of downtime possible. This solution should not require changes on the gateway setting of the network clients. Which of the following should a technician configure?

Question57: A technician needs to configure a Linux computer for network monitoring. The technician has the following information:
Linux computer details:

Switch mirror port details:

After connecting the Linux computer to the mirror port on the switch, which of the following commands should the technician run on the Linux computer?

Question58: Which of the following can be used to centrally manage credentials for various types of administrative privileges on configured network devices?

Question59: A network technician needs to ensure outside users are unable to telnet into any of the servers at the datacenter. Which of the following ports should be blocked when checking firewall configuration?

Question60: A client moving into a new office wants the IP network set up to accommodate 412 network-connected devices that are all on the same subnet. The subnet needs to be as small as possible. Which of the following subnet masks should be used to achieve the required result?

Question61: An IT organization needs to optimize speeds for global content distribution and wants to reduce latency in high-density user locations. Which of the following technologies BEST meets the organization's requirements?

Question62: A user reports a weak signal when walking 20ft (61 m) away from the WAP in one direction, but a strong signal when walking 20ft in the opposite direction The technician has reviewed the configuration and confirmed the channel type is correct There is no jitter or latency on the connection Which of the following would be the MOST likely cause of the issue?

Question63: A network administrator needs to run a single command-line tool capable of displaying routing table and multicast memberships. Which of the following would BEST help the administrator achieve the requirements?

Question64: Several WIFI users are reporting the inability to connect to the network. WLAN users on the guest network are able to access all network resources without any performance issues. The following table summarizes the findings after a site survey of the area in question:

Which of the following should a wireless technician do NEXT to troubleshoot this issue?

Question65: A network technician has multimode fiber optic cable available in an existing IDF. Which of the following Ethernet standards should the technician use to connect the network switch to the existing fiber?

Question66: Which of the following is used to track and document various types of known vulnerabilities?

Question67: Which of the following service models would MOST likely be used to replace on-premises servers with a cloud solution?

Question68: A fiber link connecting two campus networks is broken. Which of the following tools should an engineer use to detect the exact break point of the fiber link?

Question69: A technician is troubleshooting a network switch that seems to stop responding to requests intermittently whenever the logging level is set for debugging. Which of the following metrics should the technician check to begin troubleshooting the issue?

Question70: A user is having difficulty with video conferencing and is looking for assistance. Which of the following would BEST improve performance?